A broad range of top quality Polyethylene and Polypropylene products with steady and reliable supply
CAP produces high quality Polyethylene (PE) which is sold under the trademark brand “Asrene®”. PE is made by polymerization of Ethylene gas before blending the powdered resin with various additives to improve the end-product’s performance. It undergoes stringent QA/QC monitoring and testing before being packed in 25-kg packaging for our customers.
"Asrene®" product line-up consists of HDPE which has stiff property, LLDPE which has flexible property and Metallocene LLDPE which enhanced mechanical properties of LLDPE Films. It can be manufactured into a wide range of applications, which is including film, injection molding, blow molding, pipe and monofilament.
Its density vary from 0.915 to 0.925 g/cm3. Due to its molecular weight, LLDPE exhibits excellent toughness, flexibility, and relatively good transparency. LLDPE is mainly used for general injection product and film.
Product | Grade | Melt Index (g/10min) |
Density (g/cm3) |
TDS | SDS | Application |
Blown Film | UF1810 | 1.0 | 0.919 | ![]() |
![]() |
Cast and blown film, multi layer film, stretch film and powder coating |
UF1810T | 1.0 | 0.921 | ![]() |
![]() |
Blown film, cover sheet, inner liner, garment sack, rice bag and transparent film | |
UF1810S1 | 1.0 | 0.922 | ![]() |
![]() |
Blown film, garbage bag, inner liner, ice mambo bag, shopping bag and agriculture film | |
UF1820 | 2.0 | 0.917 | ![]() |
![]() |
Stretch film, cast and blown film, multi-layer film | |
UF1820T | 2.0 | 0.922 | ![]() |
![]() |
Blown film, cover sheet, garment sack, inner liner, rice bag, transparent film | |
UF1820S1 | 2.0 | 0.922 | ![]() |
![]() |
Blown film, garbage bag, inner liner, ice mambo bag, shopping bag and agriculture film | |
Injection | UI2650 | 50 | 0.927 | ![]() |
![]() |
Houseware, lid, bottle closure, masterbatch, powder coating, and toy |
UI2420 | 20 | 0.924 | ![]() |
![]() |
Houseware, lid, bottle closures, toys | |
Rotomolding | UR3840V | 4.0 | 0.936 | ![]() |
![]() |
Water and chemical tank, cool boxes, and traffic cones |
Wire and Cable | UC1827 | 2.7 | 0.920 | ![]() |
![]() |
Low voltage power insulation cable and cable jacketing |
Melt Index Test is conducted at 190 oC/2.16Kg
Its density is equal to 0.918 g/cm3. LLDPE resin made by metallocene catalyst is suitable for blown film, cast film and specialty packaging film applications that require excellent impact, toughness and outstanding heat seal.
Product | Grade | Melt Index (g/10min) |
Density (g/cm3) |
TDS | SDS | Application |
Blown Film | UF1810MH | 1.0 | 0.918 | ![]() |
![]() |
Blown Film, Multilayer Packaging Film, lamination film, FFS and heavy-duty packaging |
UF1810MT | 1.0 | 0.918 | ![]() |
![]() |
Blown Film, Multilayer Packaging Film, lamination film, FFS and heavy-duty packaging | |
UF1820MH | 2.0 | 0.918 | ![]() |
![]() |
Blown film, stretch film, multilayer packaging film, lamination film, FFS and heavy-duty packaging | |
UF1820MT | 2.0 | 0.918 | ![]() |
![]() |
Blown film, multilayer packaging film, lamination film, FFS and heavy-duty packaging | |
UF1835MH | 3.5 | 0.918 | ![]() |
![]() |
Blown film, Cast film, Cast stretch film, form fill and seal packaging |
Melt Index Test is conducted at 190 oC/2.16Kg
Its density is equal or greater to 0.941g/cm3. Due to its degree of branching, HDPE exhibits excellent tensile strength. HDPE is mainly for film, blow molding, general injection, pipe and monofilament.
Product | Grade | Melt Index (g/10min) |
Density g/cm3 |
TDS | SDS | Application |
Blown Film | UF5205H | 0.07 | 0.953 | ![]() |
![]() |
Blown Film, shopping bags, grocery and seed bags, disposal bags and Industrial liners |
SF5007 | 0.05 | 0.950 | ![]() |
![]() |
Blown film, general packaging, industrial liner, shopping and groceries bag |
|
Monofilament | SM5508 | 0.90 | 0.954 | ![]() |
![]() |
Monofilament (rope, net), flat yarn (stretched tape, tarpaulin) and multi-layer film |
Pipe | SP4808 | 0.06 | 0.949 | ![]() |
![]() |
PE-100 certified, pressurized pipe, water distribution pipe, subduct conduit, sanitary and industrial pipe |
Blow Molding | UB5502H | 0.23 | 0.954 | ![]() |
![]() |
Small sized containers (up to 5L), household and industrial container, food packaging, pharmaceutical and personal care container |
UB5206H | 0.07 | 0.953 | ![]() |
![]() |
Large sized containers (up to 100L), drum and industrial parts, non-pressure pipes, synthetic rattan |
Melt Index Test is conducted at 190 oC/2.16Kg
CAP produces high quality Polypropylene (PP) which is sold under the trademark brand “Trilene®”. PP is made by polymerization of Propylene gas before blending the powdered resin with various additives to improve the end-product’s performance. It undergoes stringent QA/QC monitoring and testing before being packed in 25-kg packaging for our customers.
“Trilene®” product line-up consists of Homopolymer which has a rigid property, Random Copolymer which has more transparent property and Impact (Block) Copolymer which has high impact resistance property. It can be manufactured into wide range of applications, which is including housewares, food packaging, electronics and automotive parts.
PP Homopolymer only consists of Propylene, has high stiffness and glossiness properties. Its applications vary from food packaging (rigid and flexible), housewares, woven bags, etc.
Product | Grade |
Melt Flow Rate |
Density (g/cm3) |
TDS | SDS | Application |
IPP Film | HF10TQ | 10 | 0.903 | ![]() |
![]() |
General packaging for food, sugar and cracker |
CPP Film | HF7.0CP | 7.0 | 0.903 | ![]() |
![]() |
CPP dry lamination film |
HF8.0CM | 8.0 | 0.903 | ![]() |
![]() |
CPP metallized film | |
BOPP Film | HF2.0BM | 2.9 | 0.903 | ![]() |
![]() |
BOPP metallized and matte film |
Thermoforming | HE2.0TF | 2.4 | 0.903 | ![]() |
![]() |
Thermoformed cup, sheet and container |
Yarn | HY3.8FY | 3.8 | 0.903 | ![]() |
![]() |
Woven bag, rope, tarpaulin, geotextile, carpet backing, strapping band, and drinking straw |
Injection | HI10HO | 10 | 0.903 | ![]() |
![]() |
Houseware, closure and toy |
HI35HO | 35 | 0.903 | ![]() |
![]() |
Thin-walled products, houseware, and multi-cavities injection molding | |
HI50TN | 50 | 0.903 | ![]() |
![]() |
Thin-Walled Injection Molding (TWIM), take-away container, yoghurt cups, pen barrel | |
Non-woven | HS35NW | 35 | 0.903 | ![]() |
![]() |
Non-woven bag, spunbond, apparel cover, disposal clothe and napkin |
PP Random Copolymer consists of Propylene and a specific portion of Ethylene comonomers. It has high clarity and flexibility, and mainly used for products such as clear containers, flip-top caps, extrusion coatings for plastic packaging and another type of packaging.
Product | Grade | Melt Flow Rate (g/10min) |
Density (g/cm3) |
TDS | SDS | Application |
Injection | RI10HO | 10 | 0.900 | ![]() |
![]() |
Medium clarity container, houseware, and general purpose injection molding application |
RI10HCO2 | 10 | 0.900 | ![]() |
![]() |
High clarity containers, cassette case, flip top and ISBM bottle | |
RI20HC02 | 20 | 0.900 | ![]() |
![]() |
High clarity containers, houseware, medical applications and general purpose injection molding aplication |
PP Impact Copolymer consists of Propylene, and Ethylene as rubbery phase. The characteristics of this type are this material can withstand impact load and low brittleness temperature (until -30oC), and can cover some applications such as plastic pails, pallets, electronics and automotive products.
Product | Grade | Melt Flow Rate (g/10min) |
Density (g/cm3) |
TDS | SDS | Application |
Injection | BI5.0GA | 4.5 | 0.900 | ![]() |
![]() |
Houseware, paint pail, motorcycle parts, toys, electrical parts, and general injection molding application |
BI5.0GN | 5 | 0.900 | ![]() |
![]() |
Houseware, furniture, paint pail, motorcycle parts, electrical parts, and general injection molding application | |
BI9.0GA | 9 | 0.900 | ![]() |
![]() |
Houseware, paint pail, toys, container, automotive and electronic parts | |
BI32AN | 38 | 0.900 | ![]() |
![]() |
Thin-wall containers, washing machine, and automotive parts | |
BI55GN | 50 | 0.900 | ![]() |
![]() |
Houseware, automotive parts, thin-wall packaging, electronic parts and compounding |